If you wish to connect your miner to a UPS (uninterruptible power supply) you need to ensure that it is rated to take the power draw of the miner. UPS devices are usually rated in volt-amperes (VA), so you will need to check the specification of the UPS to ensure that it can accommodate the draw at your location. You may need two UPS units on two separate power circuits, depending on your location’s power circuit specification.
For the 1.6TH/s TerraMiner you will need a UPS that can handle 1100 watts per power supply (x2).
For the 2.0 TH/s TerraMiner you will need a UPS that can handle 1200 watts per power supply (x2).
For the AIRE Miner you will need a UPS that can handle 1300 watts.
← Frequently Asked Questions